Industrial Nanotech Inc (INTK)

[winner06]

Case study

We're excited to share a new case study that is in from our Distributors in South Africa. They provided some excellent Flir thermal imaging photos and their application not only showed the power of the Heat Shield™ EPX-H2O coating to quickly lower a hot surface to a safe-to-touch level for safety, it also shows how the insulation "fits like a glove" over non-flat and irregular surfaces.

It's perfect timing, as I also just returned from overseeing a boiler insulation project for a large residential apartment building in New York. I've shared below a few photos that beautifully illustrate how easily the EPX-H2O coating fits over all equipment surfaces to seal the thermal envelope and give you the best energy savings possible.

Boiler Insulation | Temperature Reduced by -88.7C (-159.7F)

During a recent thermal insulation trial on a boiler, our Distributor in South Africa illustrated the power of the Heat Shield™ EPX-H20 for an industrial energy management company.

The application was performed on a section of the boiler that was 148.2 C (298.8F) and the goal was to bring the surface to a safe-to-touch level. After a 6-coat application, the coating reduced the surface temperature to 59.5C (139.1F), more than reaching the goal to safe touch and also illustrating the insulating and energy saving benefits of the coating, as well as the ease of application to both flat and non-flat surfaces.


Boiler end cap showing the Heat Shiel™ EPX-H2O coated area.